1: Quantity of files or layers to scan, convert or edit.
2: Faxed copies of all data, or e-mailed samples of data.
3: Copies of Fabrication drawing, drill chart and/or
specification sheets on Circuit Board data.
STANDARD COST (U.S. $) FOR FILM SCANNING & GERBER OUTPUT:
DOUBLE SIDED CIRCUIT BOARDS:
| 4 " X 2 " (8 sq. in) | 4 " X 3 " (12 sq. in) | 4 inch X 6 inch (24 sq.in) |
| 100-200 drill holes | 100 -300 drill holes | 200 -600 drill holes |
| 2 Circuit Layers | 2 Circuit Layers | 2 Circuit Layers |
| Soldermask Layers | Soldermask Layers | Soldermask Layers |
| One Silkscreen Layer | One Silkscreen Layer | One Silkscreen Layer |
| Drill file | Drill file | Drill file |
| $110 - $150. | $125. - $180. | $165. - $340.. |
DOUBLE SIDED CIRCUIT BOARDS:
| 6" X 8 " (48 sq. in) | 6 " X 12 " (72 sq. in) | 12 inch X 18 inch (216 sq.in) |
| 300 - 600 drill holes | 400 - 1000 drill holes | 600 - 1400 drill holes |
| 2 Circuit Layers | 2 Circuit Layers | 2 Circuit Layers |
| Soldermask Layers | Soldermask Layers | Soldermask Layers |
| One Silkscreen Layer | One Silkscreen Layer | One Silkscreen Layer |
| Drill file | Drill file | Drill file |
| $200 - $400. | $250. - $660. | $650. + |
COST ADJUSTMENTS:
| Subtract 10% if a padmaster film is included (most soldermask films or drill files will qualify). |
| Subtract up to 35% for fewer drill holes. |
| Subtract 30% for single sided boards. |
| Add 20% for a second silkscreen, SMT (Surface Mount) boards, or fine line traces under .008". |
| Add 10% to 30% for each inner layer on Multi-Layer boards. |
| Add 50% to 100% for scanning an actual circuit board (components must be removed). |
CAD FILE CONVERSION: (Non Circuit Board CAD conversions). CAD conversion prices for electrical, mechanical, sign cutting and geographic data etc.
| Vector to Vector CAD conversions - $25 minimum charge. |
| Raster (Bitmapped Images) to Vector conversions - $30 minimum per file. |
| Prices are based on the CAD file image complexity, and not the image size or byte size. |
CAD FILE CONVERSION: (PCB Gerber output from DXF, HPGL, IGES, EPS, etc.)
| 4" X 4" Circuit Board - $15 to $65 per circuit layer |
| 6" X 6" Circuit Board - $20 to $80 per circuit layer |
| 8" X 8" Circuit Board - $25 to $130 per circuit layer |
| (conversion costs vary with hole quantity and circuit complexity, fax us laser/inkjet prints for a quote) |
SURFACE MOUNT (SMT) SOLDER PASTE GERBER CREATION: Component, solder, silkscreen and drill layers (or an actual PCB) are required for us to create solder paste Gerber files.
| Under 100 SMT pads - $60+ per stencil Gerber | 200 to 300 SMT pads - $125+ per stencil Gerber |
| 100 to 200 SMT pads - $75+ per stencil Gerber | Over 300 SMT pads - $170+ per stencil Gerber |
| Reduce stencil file cost by 70% on jobs that we are scanning or converting. |
WESTWIND CAD,
12440 GRANITE RIDGE RD.
YANKEE HILL, CA 95965
USA